VOM WR

Pre-assembly sockets

VOM WR VOM WR
VOM WR VOM WR

Properties

Design
Pre-assembly sockets
Material
Hardened tool steel
Surface
phosphate treated

Note

The VOM WR is used for assembling the UEM WR

Item

19 Item
Identification Series Ø d
mm
G1 T
mm
VOM NW 04 HL WR L 6 M 12 x 1,5 7.0
VOM NW 06 HL WR L 8 M 14 x 1.5 7.0
VOM NW 08 HL WR L 10 M 16 x 1.5 7.0
VOM NW 10 HL WR L 12 M 18 x 1.5 7.0
VOM NW 13 HL WR L 15 M 22 x 1.5 7.0
VOM NW 16 HL WR L 18 M 26 x 1.5 7.5
VOM NW 20 HL WR L 22 M 30 x 2 7.5
VOM NW 25 HL WR L 28 M 36 x 2 7.5
VOM NW 32 HL WR L 35 M 45 x 2 10.5
VOM NW 40 HL WR L 42 M 52 x 2 11.0
VOM NW 03 HS WR S 6 M 14 x 1.5 7.0
VOM NW 04 HS WR S 8 M 16 x 1.5 7.0
VOM NW 06 HS WR S 10 M 18 x 1.5 7.5
VOM NW 08 HS WR S 12 M 20 x 1.5 7.5
VOM NW 13 HS WR S 16 M 24 x 1.5 8.5
VOM NW 16 HS WR S 20 M 30 x 2 10.5
VOM NW 20 HS WR S 25 M 36 x 2 12.0
VOM NW 25 HS WR S 30 M 42 x 2 13.5
VOM NW 32 HS WR S 38 M 52 x 2 16.0
Series: LL = Very light L = Light S = Heavy

Accessory for following products

WALRING union nut

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.