SRS 1-6 PA

Pipe clamp, light series

SRS 1-6 PA SRS 1-6 PA
SRS 1-6 PA SRS 1-6 PA

Properties

Construction type
Inside of clamp with web
Series
light
Standard
DIN 3015-1
Temp. min.
-40 °C
Temp. max.
120 °C
Material
Polyamide 6

Description

Webs in the inner surface of the clamps dampen impacts and vibrations and absorb forces along the pipe axis.
A gap between the two halves pretensions the pipe.

Note

The use of clamps with a smooth inner surface is recommended for retaining hoses and cables. No pretension is applied when fitting and the block height H is reduced to the gap width S1.

Item

35 Item
Identification Clamp size External pipe Ø d2
mm
External pipe Ø d2 (inch) e1
mm
H
mm
L
mm
S1
mm
SRS 106 A PA 1 6.0 - 20 27 34 0.6
SRS 106.4 A PA 1 6.4 1/4" 20 27 34 0.6
SRS 108 A PA 1 8.0 5/16" 20 27 34 0.6
SRS 109.5 A PA 1 9.5 3/8" 20 27 34 0.6
SRS 110 A PA 1 10.0 - 20 27 34 0.6
SRS 112 A PA 1 12.0 - 20 27 34 0.6
SRS 0212.7 PA 2 12.7 1/2" 26 33 40 0.8
SRS 0213.5 PA 2 13.5 - 26 33 40 0.8
SRS 0214 PA 2 14.0 - 26 33 40 0.8
SRS 0215 PA 2 15.0 - 26 33 40 0.8
SRS 0216 PA 2 16.0 5/8" 26 33 40 0.8
SRS 0217.2 PA 2 17.2 - 26 33 40 0.8
SRS 0218 PA 2 18.0 - 26 33 40 0.8
SRS 0319 PA 3 19.0 3/4" 33 35 48 1.0
SRS 0320 PA 3 20.0 - 33 35 48 1.0
SRS 0321.3 PA 3 21.3 - 33 35 48 1.0
SRS 0322 PA 3 22.0 - 33 35 48 1.0
SRS 0325 PA 3 25.0 1" 33 35 48 1.0
SRS 0426.9 PA 4 26.9 - 40 42 57 1.2
SRS 0428 PA 4 28.0 - 40 42 57 1.2
SRS 0430 PA 4 30.0 - 40 42 57 1.2
SRS 0532 PA 5 32.0 1.1/4" 52 58 70 1.2
SRS 0533.7 PA 5 33.7 - 52 58 70 1.2
SRS 0535 PA 5 35.0 - 52 58 70 1.2
SRS 0538 PA 5 38.0 1.1/2" 52 58 70 1.2
SRS 0540 PA 5 40.0 - 52 58 70 1.2
SRS 0542 PA 5 42.0 - 52 58 70 1.2
SRS 0644.5 PA 6 44.5 1.3/4" 66 66 86 1.2
SRS 0645 PA 6 45.0 - 66 66 86 1.2
SRS 0648 PA 6 48.0 - 66 66 86 1.2
SRS 0650 PA 6 50.0 - 66 66 86 1.2
SRS 0650.8 PA 6 50.8 2" 66 66 86 1.2
SRS 0652 PA 6 52.0 - 66 66 86 1.2
SRS 0655 PA 6 55.0 - 66 66 86 1.2
SRS 0657 PA 6 57.0 2.1/4" 66 66 86 1.2

Product versions

Pipe clamp, light series
Pipe clamp, light series
Pipe clamp, light series
Pipe clamp, light series
Pipe clamp, light series

Ordering information

1 piece = 2 halves of clamp


Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.