VHM 90 ED

Blanking screw with hexagon socket

VHM 90 ED VHM 90 ED
VHM 90 ED VHM 90 ED

Properties

Connection 1
metric cylindrical outer thread
Sealing form 1
Shape E
Design
Blanking screw with hexagon socket
Construction
straight
Material
Steel
Surface
electro galvanised

Note

Also available without seal as FHM.

Item

14 Item
Identification G Operating pressure D
mm
i
mm
l
mm
S
mm
VHM 90-08 ED M 8 x 1 PN 400 12.0 8 12.0 4
VHM 90-10 ED M 10 x 1 PN 400 14.0 8 12.0 5
VHM 90-12 ED M 12 x 1,5 PN 400 17.0 12 17.0 6
VHM 90-14 ED M 14 x 1.5 PN 400 19.0 12 17.0 6
VHM 90-16 ED M 16 x 1.5 PN 400 22.0 12 17.0 8
VHM 90-18 ED M 18 x 1.5 PN 400 24.0 12 17.0 8
VHM 90-20 ED M 20 x 1.5 PN 400 26.0 14 19.0 10
VHM 90-22 ED M 22 x 1.5 PN 400 27.0 14 19.0 10
VHM 90-24ED M 24 x 1.5 PN 400 29.9 14 19.0 12
VHM 90-26 ED M 26 x 1.5 PN 400 32.0 16 21.0 12
VHM 90-27 ED M 27 x 2 PN 400 32.0 16 21.0 12
VHM 90-33 ED M 33 x 2 PN 400 40.0 16 22.5 17
VHM 90-42 ED M 42 x 2 PN 315 50.0 16 22.5 22
VHM 90-48 ED M 48 x 2 PN 315 55.0 16 22.5 24
PN = Nominal pressure
PB = Max. operating pressure

Product versions

Blanking screw with hexagon socket

Spare parts

Soft seal for ED fittings

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.