SRS 0 PP

Pipe clamp, light series

SRS 0 PP SRS 0 PP
SRS 0 PP SRS 0 PP

Properties

Design
Pipe clamp
Construction type
Inside of clamp with web
Series
light
Standard
DIN 3015-1
Temp. min.
-30 °C
Temp. max.
90 °C
Material
Polypropylene (PP)

Description

Webs in the inner surface of the clamps dampen impacts and vibrations and absorb forces along the pipe axis.
A gap between the two halves pretensions the pipe.

Item

6 Item
Identification Clamp size External pipe Ø d2
mm
External pipe Ø d2 (inch) e1
mm
H
mm
L
mm
S1
mm
SRS 0106 PP 0 6.0 - 10 27 28 0.6
SRS 0106.4 PP 0 6.4 1/4" 10 27 28 0.6
SRS 0108 PP 0 8.0 5/16" 10 27 28 0.6
SRS 0109.5 PP 0 9.5 3/8" 10 27 28 0.6
SRS 0110 PP 0 10.0 - 10 27 28 0.6
SRS 0112 PP 0 12.0 - 10 27 28 0.6

Additional element for following products

Configuration of group A 0
Configuration of group A 0 composition

Product versions

Pipe clamp, light series

Ordering information

1 piece = 2 halves of clamp


Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.