K-SCHALLDAE FRUEHWARNFUKT

Silencers with early warning function

K-SCHALLDAE FRUEHWARNFUKT
K-SCHALLDAE FRUEHWARNFUKT

Properties

Max. operating pressure
5 bar
Operating temperature
Max. 70 °C
Standard
G thread acc. to DIN EN ISO 228-1
Material
Polypropylene (PP)

Description

The silencer’s warning indicator gives an early warning if the back pressure in the system is too high. Maintenance personnel can both see and hear (from the elevated sound level) that it is time to replace the silencer before costly and unnecessary disruptions impair operation. <br>The design is based on a two-chamber system with inner and outer silencing chambers. <br>The inner diffuser serves as a warning indicator that is pressed out when back pressure is too high. <br>The silencer should be replaced as soon as the inner diffuser extends far enough to show the red marking on the warning indicator.

Note

Further information on request

Item

4 Item
Identification Thread A
mm
B
mm
Flow rate nom.
l/min
Noise level
dB
Noise reduction
K- 07 40 15 22 G 1/8 male 15.7 35.5 450 65.5 32 dB(A)
K- 07 40 15 23 G 1/4 male 19.6 42.6 883 66.5 33 dB(A)
K- 07 40 15 24 G 3/8 male 26.8 57.0 1480 73.2 30 dB(A)
K- 07 40 15 25 G 1/2 male 32.4 73.5 1910 76.5 33 dB(A)

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.