HK VMP BL

VMP BL pressure relief valve

HK VMP BL HK VMP BL
HK VMP BL HK VMP BL

Properties

Design
direct-controlled
Material
Inside parts of steel
Max. operating pressure
max. 350 bar

Note

These valves must be set according to the application.

Item

10 Item
Identification Setting Connections P + T Pressure setting range bar Q max.
l/min
A
mm
B
mm
D
mm
Depth
mm
E
mm
F
mm
G
mm
Material Z
mm
Weight
kg
HK VMP BL 03 14 V Handwheel G 1/4” 50 - 220 10 60 60 48 30 14 30 32 Aluminium 6.5 0.420
HK VMP BL 05 38 V Handwheel G 3/8" 50 - 220 35 60 70 35 35 18 48 34 Aluminium 6.5 0.480
HK VMP BL 10 12 V Handwheel G 1/2" 50 - 220 60 70 78 39 35 20 58 40 Aluminium 6.5 0.520
HK VMP BL 20 34 V Handwheel G 3/4" 50 - 220 100 70 100 50 50 22 54 57 Aluminium 8.5 0.670
HK VMP BL 20 100 V Handwheel G 1" 50 - 220 100 85 120 63 60 30 65 65 Aluminium 8.5 0.860
HK VMP BL 05 38 SV Handwheel G 3/8" 180 - 350 35 60 70 35 35 18 48 34 Steel 6.5 0.600
HK VMP BL 10 12 S V Handwheel G 1/2" 180 - 350 60 70 78 39 35 20 58 40 Steel 6.5 1.000
HK VMP BL 20 100 S V Handwheel G 1" 180 - 350 100 85 120 63 60 30 65 65 Steel 8.5 4.500
HK VMP BL 20 100 Screw G 1" 50 - 220 100 85 120 63 60 30 65 65 Aluminium 8.5 0.860
HK VMP BL 20 100 S Screw G 1" 180 - 350 100 85 120 63 60 30 65 65 Steel 8.5 4.800
Material applies to the housing

Accessories

Spring for VMPBL pressure relief valve

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.