HK EPMS

EPMS geroller motor

HK EPMS HK EPMS
HK EPMS HK EPMS

Properties

Connection
Oil fittings: A + B = G 1/2"
Leak oil connection
G 1/4"
Design
Standard variant
Type "C" with standard seal
Shaft Ø 32mm
Four hole flange bolt circle 106,4
Intake and return pressure with leak oil line max.
210 bar

Note

It is generally recommended that the leak oil line is connected!

Item

8 Item
Identification Flow rate max.
l/min
Displacement
cm³
Speed max.
r/min
Speed min.
r/min
Torque max.
Nm
Pressure drop max.
bar
Pmax. at 0-100 rpm
bar
Pmax. at 100-300 rpm
bar
Pmax. at >300 rpm
bar
L
mm
Weight
kg
HK EPMS 080 C 65 80.5 810 10 240 210 100 50 20 166 9.800
HK EPMS 100 C 75 100.0 750 10 300 210 100 50 20 169 10.000
HK EPMS 125 C 75 125.7 600 8 375 210 100 50 20 174 10.300
HK EPMS 160 C 75 159.7 470 8 490 210 100 50 20 180 10.700
HK EPMS 200 C 75 200.0 375 8 610 210 100 50 20 187 11.100
HK EPMS 250 C 75 250.0 300 8 720 200 100 50 - 195 11.600
HK EPMS 315 C 75 314.9 240 8 825 200 100 50 - 207 12.300
HK EPMS 400 C 75 397.0 190 8 865 160 100 50 - 221 13.200
Values for torque and pressure drop apply for continuous operation
pmax = max. pressure
max. pressure on shaft seal (without leak oil line) or pressure in leak oil line

Accessories

Shock valve

Spare parts

Seal kit for hydraulic planetary motor

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.