PN SF9 45

Swage nipple, SFS-CAT angle 45°

PN SF9 45 PN SF9 45
PN SF9 45 PN SF9 45

Properties

Application area
Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1
SAE flange connection 6000 PSI
Sealing form 1
flat seal with SF O-ring
Short code
SFS-CAT
suitable for
Caterpillar
Material
Steel
Surface
electro galvanised

Note

Choose the appropriate ferrule based on the hose type.

Item

7 Item
Identification DN Size Inches Flange size Operating pressure
bar
D
mm
H
mm
L1
mm
L2
mm
PN 20 SF9 45 19 12 3/4" 3/4" 420.0 41.3 14.6 114.0 34.5
PN 20 SF9 25 45 19 12 3/4" 1" 420.0 47.6 14.6 118.0 38.5
PN 25 SF9 45 25 16 1" 1" 420.0 47.6 14.6 140.5 38.5
PN 25 SF9 32 45 25 16 1" 1.1/4" 420.0 54.0 14.6 145.0 43.0
PN 32 SF9 45 31 20 1.1/4" 1.1/4" 420.0 54.0 14.6 167.0 47.0
PN 32 SF9 40 45 31 20 1.1/4" 1.1/2" 420.0 63.5 14.6 171.0 51.5
PN 40 SF9 45 38 24 1.1/2" 1.1/2" 420.0 63.5 14.6 191.0 53.0
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.