PN SF9

Swage nipple, SFS-CAT

PN SF9 PN SF9
PN SF9 PN SF9

Properties

Application area
Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1
SAE flange connection 6000 PSI
Sealing form 1
flat seal with SF O-ring
Short code
SFS-CAT
suitable for
Caterpillar
Material
Steel
Surface
electro galvanised

Note

Choose the appropriate ferrule based on the hose type.

Item

7 Item
Identification DN Size Inches Flange size Operating pressure
bar
D
mm
H
mm
L1
mm
PN 20 SF9 19 12 3/4" 3/4" 420.0 41.3 14.6 110.0
PN 20 SF9 25 19 12 3/4" 1" 420.0 47.6 14.6 114.5
PN 25 SF9 25 16 1" 1" 420.0 47.6 14.6 127.0
PN 25 SF9 32 25 16 1" 1.1/4" 420.0 54.0 14.6 131.5
PN 32 SF9 31 20 1.1/4" 1.1/4" 420.0 54.0 14.6 143.5
PN 32 SF9 40 31 20 1.1/4" 1.1/2" 420.0 63.5 14.6 148.0
PN 40 SF9 38 24 1.1/2" 1.1/2" 420.0 63.5 14.6 156.0
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.