PN SF 45 VA

Swage nipple, SFL angle 45°

PN SF 45 VA PN SF 45 VA
PN SF 45 VA PN SF 45 VA

Properties

Application area
Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1
SAE flange connection 3000 PSI
Sealing form 1
flat seal with SF O-ring
Short code
SFL
Material
Stainless steel
Standard
SAE J 518
ISO 6162-1

Note

Choose the appropriate ferrule based on the hose type.

Item

14 Item
Identification DN Size Inches Flange size Operating pressure
bar
D
mm
H
mm
L2
mm
PN 13 SF 45 VA 12 8 1/2" 1/2" 350.0 30.2 6.7 30.0
PN 13 SF 20 45 VA 12 8 1/2" 3/4" 350.0 38.1 6.7 34.0
PN 16 SF 13 45 VA 16 10 5/8" 1/2" 350.0 30.2 6.7 34.0
PN 16 SF 20 45 VA 16 10 5/8" 3/4" 350.0 38.1 6.7 34.0
PN 20 SF 45 VA 19 12 3/4" 3/4" 350.0 38.1 6.7 36.0
PN 20 SF 25 45 VA 19 12 3/4" 1" 320.0 44.5 8.0 31.0
PN 25 SF 45 VA 25 16 1" 1" 320.0 44.5 8.0 39.0
PN 25 SF 32 45 VA 25 16 1" 1.1/4" 280.0 50.8 8.0 43.0
PN 32 SF 45 VA 31 20 1.1/4" 1.1/4" 280.0 50.8 8.0 44.0
PN 32 SF 40 45 VA 31 20 1.1/4" 1.1/2" 210.0 60.3 8.0 36.0
PN 40 SF 45 VA 38 24 1.1/2" 1.1/2" 210.0 60.3 8.0 45.0
PN 40 SF 50 45 VA 38 24 1.1/2" 2" 210.0 71.4 9.5 58.0
PN 50 SF 45 VA 51 32 2" 2" 210.0 71.4 9.5 57.0
PN 60 SF 45 VA 60 40 2.3/8" 2.1/2" 175.0 84.1 9.5 -
DN = Nominal diameter, nominal width

Product versions

Swage nipple, SFL angle 45°

Ordering information

Seals of NBR
FPM (Viton) on request


Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.