SKS IN SN H

Plug-in coupling connector

SKS IN SN H SKS IN SN H

Properties

Application area
General application, e.g. in industry, construction machinery, agricultural technology etc.
Design
Snap-tite series H
Connection 1
NPT internal thread
Sealing form 1
thread seal
Material
Steel
Surface
electro galvanised

Description

Plug-in couplings allow quick coupling.

Item

10 Item
Identification DN* Connecting thread Operating pressure
bar
Mineral oil temp. min.
°C
Mineral oil temp. max.
°C
SF coup.*
SKS 06 IN SN H 6 NPT 1/4" -18 450.0 -40 90 2
SKS 10 IN SN H 10 NPT 3/8" -18 310.0 -40 90 2
SKS 13 IN SN H 12 NPT 1/2" -14 280.0 -40 90 2
SKS 20 IN SN H 19 NPT 3/4" -14 245.0 -40 90 2
SKS 25 IN SN H 25 NPT 1" -11,5 140.0 -40 90 2
SKS 32 IN SN H 31 NPT 1.1/4" -11,5 125.0 -40 90 2
SKS 40 IN SN H 38 NPT 1.1/2" -11,5 105.0 -40 90 2
SKS 50 IN SN H 51 NPT 2" -11,5 105.0 -40 90 2
SKS 65 IN SN H 65 NPT 2.1/2" -8 70.0 -40 90 2
SKS 75 IN SN H 76 NPT 3" -8 55.0 -40 90 2
DN = Nominal diameter, nominal width
SF coup. = Safety factor coupled

Accessories

Dust protection coupling connector, SKS..SN H

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.