W45 HROK HJOF

Screw-in socket, angle 45°

W45 HROK HJOF W45 HROK HJOF
W45 HROK HJOF W45 HROK HJOF

Properties

Connection 1
BSP external thread, cylindrical
Sealing form 1
O-ring and spacer diaphragm ring
Connection 2
ORFS external threads
Sealing form 2
flat seal with O-ring
Design
Adjustable direction screw-in socket
Construction
Angle 45°
Material
Steel
Surface
electro galvanised

Item

14 Item
Identification G1 G2 AF
mm
S1 OR1 OR2
W45 HROK 02 HJOF 04 G 1/8" -28 9/16"-18 UNF 14 14 8.00 x 2.00 7.65 x 1.78
W45 HROK 04 HJOF G 1/4" -19 9/16"-18 UNF 19 19 10.77 x 2.62 7.65 x 1.78
W45 HROK 04 HJOF 06 G 1/4" -19 11/16" -16 UN 19 19 10.77 x 2.62 9.25 x 1.78
W45 HROK 06 HJOF G 3/8" -19 11/16" -16 UN 19 22 13.94 x 2.62 9.25 x 1.78
W45 HROK 06 HJOF 08 G 3/8" -19 13/16" -16 UN 19 22 13.94 x 2.62 12.42 x 1.78
W45 HROK 08 HJOF 06 G 1/2" -14 11/16" -16 UN 27 27 17.86 x 2.62 9.25 x 1.78
W45 HROK 08 HJOF G 1/2" -14 13/16" -16 UN 27 27 17.86 x 2.62 12.42 x 1.78
W45 HROK 08 HJOF 10 G 1/2" -14 1" -14 UNS 27 27 17.86 x 2.62 15.60 x 1.78
W45 HROK 12 HJOF 10 G 3/4" -14 1" -14 UNS 30 36 23.47 x 2.62 15.60 x 1.78
W45 HROK 12 HJOF G 3/4" -14 1.3/16" -12 UN 30 36 23.47 x 2.62 18.77 x 1.78
W45 HROK 16 HJOF 12 G 1" -11 1.3/16" -12 UN 36 41 29.75 x 3.53 18.77 x 1.78
W45 HROK 16 HJOF G 1" -11 1.7/16" -12 UN 36 41 29.75 x 3.53 23.52 x 1.78
W45 HROK 20 HJOF G 1.1/4" -11 1.11/16" -12 UN 41 50 37.69 x 3.53 29.87 x 1.78
W45 HROK 24 HJOF G 1.1/2" -11 2" -12 UN 50 55 44.04 x 3.53 37.82 x 1.78
SW, S1, S2, S3 = With across flats

Spare parts

Spacer diaphragm ring, imperial

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.