W90 O HJ

Screw-in socket, AGJ, angle 90°

W90 O HJ W90 O HJ
W90 O HJ W90 O HJ

Properties

Design
Adjustable direction screw-in socket
Construction
Angle 90°
Material
Steel
Surface
electro galvanised
Connection 1
UN/UNF external threads
Sealing form 1
O-ring seal on screw-in socket
Connection 2
UN/UNF external threads
Sealing form 2
74° outer cone

Item

29 Item
Identification G1 G2 AF
mm
S1 OR
W90 O 04 HJ 7/16"-20 UNF 7/16"-20 UNF 12 14 9.17 x 1.63
W90 O 04 HJ 05 7/16"-20 UNF 1/2"-20 UNF 12 14 9.17 x 1.63
W90 O 04 HJ 06 7/16"-20 UNF 9/16"-18 UNF 12 14 9.17 x 1.63
W90 O 05 HJ 04 1/2"-20 UNF 7/16"-20 UNF 13 17 10.52 x 1.83
W90 O 05 HJ 1/2"-20 UNF 1/2"-20 UNF 13 17 10.52 x 1.83
W90 O 05 HJ 06 1/2"-20 UNF 9/16"-18 UNF 13 17 10.52 x 1.83
W90 O 06 HJ 04 9/16"-18 UNF 7/16"-20 UNF 14 17 11.90 x 1.98
W90 O 06 HJ 05 9/16"-18 UNF 1/2"-20 UNF 14 17 11.90 x 1.98
W90 O 06 HJ 9/16"-18 UNF 9/16"-18 UNF 14 17 11.90 x 1.98
W90 O 06 HJ 08 9/16"-18 UNF 3/4" -16 UNF 14 17 11.90 x 1.98
W90 O 08 HJ 3/4" -16 UNF 3/4" -16 UNF 19 22 16.36 x 2.20
W90 O 08 HJ 06 3/4" -16 UNF 9/16"-18 UNF 19 22 16.36 x 2.20
W90 O 08 HJ 10 3/4" -16 UNF 7/8" -14 UNF 19 22 16.36 x 2.20
W90 O 08 HJ 12 3/4" -16 UNF 1.1/16" -12 UN 19 22 16.36 x 2.20
W90 O 10 HJ 08 7/8" -14 UNF 3/4" -16 UNF 22 27 19.18 x 2.46
W90 O 10 HJ 06 7/8" -14 UNF 9/16"-18 UNF 22 27 19.18 x 2.46
W90 O 10 HJ 7/8" -14 UNF 7/8" -14 UNF 22 27 19.18 x 2.46
W90 O 10 HJ 12 7/8" -14 UNF 1.1/16" -12 UN 22 27 19.18 x 2.46
W90 O 12 HJ 08 1.1/16" -12 UN 3/4" -16 UNF 27 32 23.47 x 2.95
W90 O 12 HJ 1.1/16" -12 UN 1.1/16" -12 UN 27 32 23.47 x 2.95
W90 O 12 HJ 16 1.1/16" -12 UN 1.5/16" -12 UN 27 32 23.47 x 2.95
W90 O 12 HJ 10 1.1/16" -12 UN 7/8" -14 UNF 27 32 23.47 x 2.95
W90 O 16 HJ 1.5/16" -12 UN 1.5/16" -12 UN 33 41 29.74 x 2.95
W90 O 16 HJ 12 1.5/16" -12 UN 1.1/16" -12 UN 33 41 29.74 x 2.95
W90 O 16 HJ 20 1.5/16" -12 UN 1.5/8" -12 UN 33 41 29.74 x 2.95
W90 O 20 HJ 16 1.5/8" -12 UN 1.5/16" -12 UN 41 50 37.47 x 3.00
W90 O 20 HJ 1.5/8" -12 UN 1.5/8" -12 UN 41 50 37.47 x 3.00
W90 O 24 HJ 1.7/8" -12 UN 1.7/8" -12 UN 48 55 43.69 x 3.00
W90 O 32 HJ 2.1/2" -12 UN 2.1/2" -12 UN 65 70 59.36 x 3.00
SW, S1, S2, S3 = With across flats

Product versions

Screw-in socket, AGJ, angle 90°

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.