W90 IN HJ

Screw-on socket, IGN AGJ angle 90°

W90 IN HJ W90 IN HJ
W90 IN HJ W90 IN HJ

Properties

Construction
Angle 90°
Design
Screw-on socket
Connection 1
NPT internal thread
Sealing form 1
thread seal
Connection 2
UN/UNF external threads
Sealing form 2
74° outer cone
Material
Steel
Surface
electro galvanised

Item

16 Item
Identification G1 G2 AF
mm
W90 IN 02 HJ 04 1/8" -27 NPT 7/16"-20 UNF 14
W90 IN 02 HJ 05 1/8" -27 NPT 1/2"-20 UNF 14
W90 IN 02 HJ 06 1/8" -27 NPT 9/16"-18 UNF 14
W90 IN 04 HJ 1/4" -18 NPT 7/16"-20 UNF 19
W90 IN 04 HJ 05 1/4" -18 NPT 1/2"-20 UNF 19
W90 IN 04 HJ 06 1/4" -18 NPT 9/16"-18 UNF 19
W90 IN 04 HJ 08 1/4" -18 NPT 3/4" -16 UNF 19
W90 IN 06 HJ 3/8" -18 NPT 9/16"-18 UNF 22
W90 IN 06 HJ 08 3/8" -18 NPT 3/4" -16 UNF 22
W90 IN 08 HJ 1/2" -14 NPT 3/4" -16 UNF 27
W90 IN 08 HJ 10 1/2" -14 NPT 7/8" -14 UNF 27
W90 IN 08 HJ 12 1/2" -14 NPT 1.1/16" -12 UN 27
W90 IN 12 HJ 3/4" -14 NPT 1.1/16" -12 UN 33
W90 IN 16 HJ 1" -11.5 NPT 1.5/16" -12 UN 41
W90 IN 20 HJ 1.1/4" -11.5 NPT 1.5/8" -12 UN 48
W90 IN 24 HJ 1.1/2" -11.5 NPT 1.7/8" -12 UN 64
AF = Width across flats

Product versions

Screw-on socket, IGN AGJ angle 90°

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.