#### G H

Connectors##### Product image

##### Properties

Connection 1 |
metric cylindrical outer thread |

Sealing form 1 |
60° inner cone |

Connection 2 |
metric cylindrical outer thread |

Sealing form 2 |
60° inner cone |

Design |
Connectors |

Construction |
straight |

Material |
Steel |

Surface |
electro galvanised |

##### Item

Sort upwards

Sort downwards

Identification | G1 | G2 | SW (mm) |
---|---|---|---|

G 04 H 02 | M 12 x 1.5 | M 10 x 1 | 17 |

G H 04 | M 12 x 1.5 | M 12 x 1.5 | 17 |

G 06 H 04 | M 14 x 1.5 | M 12 x 1.5 | 19 |

G H 06 | M 14 x 1.5 | M 14 x 1.5 | 19 |

G 08 H 04 | M 16 x 1.5 | M 12 x 1.5 | 22 |

G 08 H 06 | M 16 x 1.5 | M 14 x 1.5 | 22 |

G H 08 | M 16 x 1.5 | M 16 x 1.5 | 22 |

G H 10 | M 18 x 1.5 | M 18 x 1.5 | 24 |

G 13 H 10 | M 22 x 1.5 | M 18 x 1.5 | 27 |

G H 13 | M 22 x 1.5 | M 22 x 1.5 | 27 |

G H 16 | M 26 x 1.5 | M 26 x 1.5 | 32 |

G H 20 | M 30 x 1.5 | M 30 x 1.5 | 36 |

G H 25 | M 38 x 1.5 | M 38 x 1.5 | 46 |

G 25 H 20 | M 38 x 1.5 | M 30 x 1.5 | 46 |

G 32 H 25 | M 45 x 1.5 | M 38 x 1.5 | 55 |

G H 32 | M 45 x 1.5 | M 45 x 1.5 | 55 |

G 40 H 32 | M 52 x 1.5 | M 45 x 1.5 | 55 |

G H 40 | M 52 x 1.5 | M 52 x 1.5 | 55 |

G 50 H 40 | M 65 x 2 | M 52 x 1.5 | 65 |

G H 50 | M 65 x 2 | M 65 x 2 | 65 |

G H 60 | M 78 x 2 | M 78 x 2 | 80 |

SW = Width across flats

##### Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.

All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.